(kicad_pcb (version 20240108) (generator "designgraph") (generator_version "0.1")

  (general
    (thickness 1.6000)
    (legacy_teardrops no)
  )

  (layers
    (0 "F.Cu" signal)
    (31 "B.Cu" signal)
    (32 "B.Adhes" user)
    (33 "F.Adhes" user)
    (34 "B.Paste" user)
    (35 "F.Paste" user)
    (36 "B.SilkS" user)
    (37 "F.SilkS" user)
    (38 "B.Mask" user)
    (39 "F.Mask" user)
    (40 "Dwgs.User" user)
    (41 "Cmts.User" user)
    (42 "Eco1.User" user)
    (43 "Eco2.User" user)
    (44 "Edge.Cuts" user)
    (45 "Margin" user)
    (46 "B.CrtYd" user)
    (47 "F.CrtYd" user)
    (48 "B.Fab" user)
    (49 "F.Fab" user)
      (55 "User.6" user)
    (56 "User.7" user)
)

  (setup
    (pad_to_mask_clearance 0)
  )

  (net 0 "")
  (net 1 "+3V3")
  (net 2 "GND")
  (net 3 "+12V")
  (net 4 "FAN_DRIVE")
  (net 5 "/gh/Q1_GATE")
  (net 6 "/gh/FAN_LOW")
  (net 7 "PUMP_DRIVE")
  (net 8 "/gh/Q2_GATE")
  (net 9 "/gh/PUMP_LOW")
  (net 10 "SSR_HEATER")
  (net 11 "/gh/SSR_HEATER_OUT")
  (net 12 "SSR_LIGHT")
  (net 13 "/gh/SSR_LIGHT_OUT")
  (net 14 "SOIL_A0")
  (net 15 "SOIL_A1")
  (net 16 "SOIL_A2")
  (net 17 "SOIL_A3")
  (net 18 "I2C_SDA")
  (net 19 "I2C_SCL")
  (net 20 "/gh/LED_R_TO_LED_A")
  (net 21 "/gh/LED_K_TO_GPIO")
	(net 22 "unconnected-(J1-Pad16)")
	(net 23 "unconnected-(J1-Pad17)")
	(net 24 "unconnected-(J1-Pad18)")
	(net 25 "unconnected-(J1-Pad19)")
	(net 26 "unconnected-(J1-Pad2)")
	(net 27 "unconnected-(J1-Pad20)")
	(net 28 "unconnected-(J1-Pad21)")
	(net 29 "unconnected-(J1-Pad3)")
	(net 30 "unconnected-(J1-Pad4)")
	(net 31 "unconnected-(J2-Pad10)")
	(net 32 "unconnected-(J2-Pad11)")
	(net 33 "unconnected-(J2-Pad12)")
	(net 34 "unconnected-(J2-Pad13)")
	(net 35 "unconnected-(J2-Pad14)")
	(net 36 "unconnected-(J2-Pad15)")
	(net 37 "unconnected-(J2-Pad16)")
	(net 38 "unconnected-(J2-Pad17)")
	(net 39 "unconnected-(J2-Pad18)")
	(net 40 "unconnected-(J2-Pad19)")
	(net 41 "unconnected-(J2-Pad2)")
	(net 42 "unconnected-(J2-Pad20)")
	(net 43 "unconnected-(J2-Pad21)")
	(net 44 "unconnected-(J2-Pad3)")
	(net 45 "unconnected-(J2-Pad4)")
	(net 46 "unconnected-(J2-Pad5)")
	(net 47 "unconnected-(J2-Pad6)")
	(net 48 "unconnected-(J2-Pad7)")
	(net 49 "unconnected-(J2-Pad8)")
	(net 50 "unconnected-(J2-Pad9)")
	(net 51 "unconnected-(J3-Pad)")
	(net 52 "unconnected-(J4-Pad)")
	(net 53 "unconnected-(J5-Pad)")
	(net 54 "unconnected-(J6-Pad)")
	(net 55 "unconnected-(J7-Pad)")
	(net 56 "unconnected-(MH1-Pad)")
	(net 57 "unconnected-(MH2-Pad)")
	(net 58 "unconnected-(MH3-Pad)")
	(net 59 "unconnected-(MH4-Pad)")

  (net_class "Default" ""
    (clearance 0.1)
    (trace_width 0.1)
    (via_dia 0.45)
    (via_drill 0.2)
    (uvia_dia 0.25)
    (uvia_drill 0.15)
  )

  (gr_line (start 0.0000 0.0000) (end 100.0000 0.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 100.0000 0.0000) (end 100.0000 90.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 100.0000 90.0000) (end 0.0000 90.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))
  (gr_line (start 0.0000 90.0000) (end 0.0000 0.0000) (stroke (width 0.05) (type default)) (layer "Edge.Cuts"))

  	  (gr_rect
    (start -5.0000 -5.0000)
    (end 105.0000 95.0000)
    (stroke (width 0.05) (type default))
    (fill no)
    (layer "User.6")
    (uuid "59fe4449-5982-4856-adf9-be9a8e697037")
  )
(footprint "PinHeader_1x22_P2.54mm_Vertical"
			(at 2.27 13.03 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 1x22, 2.54mm pitch, single row")
		(tags "Through hole pin header THT 1x22 2.54mm single row")
		(property "Reference" "J1"
			(at 0 -2.38 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "ESP32-Header1"
			(at 0 55.72 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "connector/pin_header_socket"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.38 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 54.72)
			(end 1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.38 1.27)
			(end 1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 1.77 55.12)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 -0.635)
			(end -0.635 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 54.61)
			(end -1.27 -0.635)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.635 -1.27)
			(end 1.27 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 -1.27)
			(end 1.27 54.61)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 54.61)
			(end -1.27 54.61)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 26.67 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "+3V3")
		)
		(pad "2" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad2)")
		)
		(pad "3" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad3)")
		)
		(pad "4" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad4)")
		)
		(pad "5" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "FAN_DRIVE")
		)
		(pad "6" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "PUMP_DRIVE")
		)
		(pad "7" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SSR_HEATER")
		)
		(pad "8" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SSR_LIGHT")
		)
		(pad "9" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A0")
		)
		(pad "10" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A1")
		)
		(pad "11" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A2")
		)
		(pad "12" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A3")
		)
		(pad "13" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "I2C_SDA")
		)
		(pad "14" thru_hole circle
			(at 0 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "I2C_SCL")
		)
		(pad "15" thru_hole circle
			(at 0 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "/gh/LED_K_TO_GPIO")
		)
		(pad "16" thru_hole circle
			(at 0 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad16)")
		)
		(pad "17" thru_hole circle
			(at 0 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad17)")
		)
		(pad "18" thru_hole circle
			(at 0 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad18)")
		)
		(pad "19" thru_hole circle
			(at 0 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad19)")
		)
		(pad "20" thru_hole circle
			(at 0 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad20)")
		)
		(pad "21" thru_hole circle
			(at 0 50.8)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J1-Pad21)")
		)
		(pad "22" thru_hole circle
			(at 0 53.34)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x22_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "PinHeader_1x22_P2.54mm_Vertical"
			(at 97.73 13.03 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 1x22, 2.54mm pitch, single row")
		(tags "Through hole pin header THT 1x22 2.54mm single row")
		(property "Reference" "J2"
			(at 0 -2.38 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "ESP32-Header2"
			(at 0 55.72 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "connector/pin_header_socket"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.38 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 54.72)
			(end 1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.38 1.27)
			(end 1.38 54.72)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1.77 -1.78)
			(end 1.77 55.12)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 -0.635)
			(end -0.635 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 54.61)
			(end -1.27 -0.635)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.635 -1.27)
			(end 1.27 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 -1.27)
			(end 1.27 54.61)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 54.61)
			(end -1.27 54.61)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 26.67 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "+3V3")
		)
		(pad "2" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad2)")
		)
		(pad "3" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad3)")
		)
		(pad "4" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad4)")
		)
		(pad "5" thru_hole circle
			(at 0 10.16)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad5)")
		)
		(pad "6" thru_hole circle
			(at 0 12.7)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad6)")
		)
		(pad "7" thru_hole circle
			(at 0 15.24)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad7)")
		)
		(pad "8" thru_hole circle
			(at 0 17.78)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad8)")
		)
		(pad "9" thru_hole circle
			(at 0 20.32)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad9)")
		)
		(pad "10" thru_hole circle
			(at 0 22.86)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad10)")
		)
		(pad "11" thru_hole circle
			(at 0 25.4)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad11)")
		)
		(pad "12" thru_hole circle
			(at 0 27.94)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad12)")
		)
		(pad "13" thru_hole circle
			(at 0 30.48)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad13)")
		)
		(pad "14" thru_hole circle
			(at 0 33.02)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad14)")
		)
		(pad "15" thru_hole circle
			(at 0 35.56)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad15)")
		)
		(pad "16" thru_hole circle
			(at 0 38.1)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad16)")
		)
		(pad "17" thru_hole circle
			(at 0 40.64)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad17)")
		)
		(pad "18" thru_hole circle
			(at 0 43.18)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad18)")
		)
		(pad "19" thru_hole circle
			(at 0 45.72)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad19)")
		)
		(pad "20" thru_hole circle
			(at 0 48.26)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad20)")
		)
		(pad "21" thru_hole circle
			(at 0 50.8)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "unconnected-(J2-Pad21)")
		)
		(pad "22" thru_hole circle
			(at 0 53.34)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x22_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal"
			(at 21.27 4.1 180)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 2.54mm, size 5.54x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 5.54x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J3"
			(at 1.27 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "12V_IN"
			(at 1.27 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 4.16 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 4.16 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end -1.03 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.03 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.03 2.6)
			(end 1.51 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.51 3.22)
			(end 1.03 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.57 2.6)
			(end 4.16 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 -3.22)
			(end 4.16 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 3.22)
			(end 3.57 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.57)
				(xy 0.44 4.18)
				(xy -0.44 4.18)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 4.54 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 4.04 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 4.04 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 4.04 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 -3.1)
			(end 4.04 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(J3-Pad)")
		)
		(pad "" np_thru_hole circle
			(at 2.54 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "+12V")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal"
			(at 18.73 85.9 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 2.54mm, size 5.54x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 5.54x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J4"
			(at 1.27 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "FAN_OUT"
			(at 1.27 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 4.16 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 4.16 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end -1.03 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.03 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.03 2.6)
			(end 1.51 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.51 3.22)
			(end 1.03 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.57 2.6)
			(end 4.16 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 -3.22)
			(end 4.16 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 3.22)
			(end 3.57 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.57)
				(xy 0.44 4.18)
				(xy -0.44 4.18)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 4.54 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 4.04 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 4.04 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 4.04 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 -3.1)
			(end 4.04 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(J4-Pad)")
		)
		(pad "" np_thru_hole circle
			(at 2.54 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "+12V")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "/gh/FAN_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal"
			(at 48.73 85.9 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 2.54mm, size 5.54x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 5.54x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J5"
			(at 1.27 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "PUMP_OUT"
			(at 1.27 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Footprint" "TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "eaaf80c2-2442-4dea-ada7-c662be635103")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" "TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "d723bfd0-3b7b-453c-a47f-6b302a758ade")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Height" "10"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "0fe04946-2725-469a-a53d-6d418224e8fa")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 4.16 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 4.16 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end -1.03 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.03 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.03 2.6)
			(end 1.51 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.51 3.22)
			(end 1.03 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.57 2.6)
			(end 4.16 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 -3.22)
			(end 4.16 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.16 3.22)
			(end 3.57 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.57)
				(xy 0.44 4.18)
				(xy -0.44 4.18)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 4.54 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 4.04 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 4.04 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 4.04 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 -3.1)
			(end 4.04 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.04 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(J5-Pad)")
		)
		(pad "" np_thru_hole circle
			(at 2.54 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "+12V")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "/gh/PUMP_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	
		(fp_rect
			(start -2.0000 -3.6000)
			(end 4.5400 12.6000)
			(stroke
				(width 0.01)
				(type default)
			)
			(fill no)
			(layer "F.Fab")
			(uuid "8051ba74-2221-4cbe-a235-dee0a48bf95a")
		)
)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal"
			(at 50.3578 39.1471 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 2.54mm, size 8.08x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-3-2.54 pitch 2.54mm size 8.08x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J6"
			(at 2.54 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "SSR_HEATER"
			(at 2.54 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Footprint" "TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "36f096f4-2ead-4930-a54b-f6f620bbcd9e")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" "TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "60320d13-1d17-4dfa-abfc-470e43ddc25b")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Height" "10"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "652f2a81-a517-4bca-ae1f-e4fd9f18a288")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 6.7 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 6.7 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end -1.03 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.03 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.03 2.6)
			(end 1.51 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.51 3.22)
			(end 1.03 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.57 2.6)
			(end 4.05 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.05 3.22)
			(end 3.57 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.11 2.6)
			(end 6.7 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.7 -3.22)
			(end 6.7 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.7 3.22)
			(end 6.11 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.57)
				(xy 0.44 4.18)
				(xy -0.44 4.18)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 7.08 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 6.58 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 6.58 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 6.58 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.78 -0.834)
			(end 4.246 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.914 -0.7)
			(end 4.38 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.58 -3.1)
			(end 6.58 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.58 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 5.08 0)
			(end 6.18 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 2.54 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(J6-Pad)")
		)
		(pad "" np_thru_hole circle
			(at 2.54 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "/gh/SSR_HEATER_OUT")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "3" thru_hole circle
			(at 5.08 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	
		(fp_rect
			(start -2.0000 -12.6000)
			(end 7.0800 3.6000)
			(stroke
				(width 0.01)
				(type default)
			)
			(fill no)
			(layer "F.Fab")
			(uuid "b0f2bebc-ebc3-4dee-abb5-7c9604145bb9")
		)
)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal"
			(at 40.3275 32.2092 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 2.54mm, size 8.08x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-3-2.54 pitch 2.54mm size 8.08x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J7"
			(at 2.54 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "SSR_LIGHT"
			(at 2.54 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 6.7 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 6.7 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end -1.03 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.03 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.03 2.6)
			(end 1.51 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.51 3.22)
			(end 1.03 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.57 2.6)
			(end 4.05 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 4.05 3.22)
			(end 3.57 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.11 2.6)
			(end 6.7 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.7 -3.22)
			(end 6.7 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.7 3.22)
			(end 6.11 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.57)
				(xy 0.44 4.18)
				(xy -0.44 4.18)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 7.08 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 6.58 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 6.58 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 6.58 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.78 -0.834)
			(end 4.246 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.914 -0.7)
			(end 4.38 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.58 -3.1)
			(end 6.58 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 6.58 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 5.08 0)
			(end 6.18 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 2.54 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(J7-Pad)")
		)
		(pad "" np_thru_hole circle
			(at 2.54 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "" np_thru_hole circle
			(at 5.08 2.54)
			(size 1.1 1.1)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "/gh/SSR_LIGHT_OUT")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "3" thru_hole circle
			(at 5.08 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal"
			(at 40.9497 18.9717 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Terminal Block Phoenix MPT-0,5-8-2.54, 8 pins, pitch 2.54mm, size 20.8x6.2mm, drill diameter 1.1mm, pad diameter 2.2mm, http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf")
		(tags "THT Terminal Block Phoenix MPT-0,5-8-2.54 pitch 2.54mm size 20.8x6.2mm drill 1.1mm pad 2.2mm")
		(property "Reference" "J8"
			(at 8.89 -4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "SOIL_PROBES"
			(at 8.89 4.22 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "terminal_block/Phoenix"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Footprint" "TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7dbbb831-3e3d-4f1c-a898-7f8a38b5fc34")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" "TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "d5806a97-b8ba-41b9-a413-e0ee70417605")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Height" "10"
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "667b517d-8790-44f6-a6c3-ae42752c344d")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.62 -3.22)
			(end 19.4 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 -2.7)
			(end 19.4 -2.7)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 2.6)
			(end 19.4 2.6)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.62 3.22)
			(end -1.62 -3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.3 3.22)
			(end -1.62 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 19.4 -3.22)
			(end 19.4 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 19.4 3.22)
			(end 0.3 3.22)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy 0 3.22)
				(xy 0.44 3.83)
				(xy -0.44 3.83)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_rect
			(start -2 -3.6)
			(end 19.78 3.6)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -3.1)
			(end 19.28 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 -2.7)
			(end 19.28 -2.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end -1.5 -3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.5 2.6)
			(end 19.28 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 3.1)
			(end -1.5 2.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.7 -0.834)
			(end -0.834 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.834 -0.7)
			(end -0.7 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.24 -0.834)
			(end 1.706 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 3.374 -0.7)
			(end 1.84 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.78 -0.834)
			(end 4.246 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 5.914 -0.7)
			(end 4.38 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 8.32 -0.834)
			(end 6.786 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 8.454 -0.7)
			(end 6.92 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 10.86 -0.834)
			(end 9.326 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 10.994 -0.7)
			(end 9.46 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 13.4 -0.834)
			(end 11.866 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 13.534 -0.7)
			(end 12 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 15.94 -0.834)
			(end 14.406 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 16.074 -0.7)
			(end 14.54 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 18.48 -0.834)
			(end 16.946 0.7)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 18.614 -0.7)
			(end 17.08 0.834)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 19.28 -3.1)
			(end 19.28 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 19.28 3.1)
			(end -1 3.1)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_circle
			(center 0 0)
			(end 1.1 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 2.54 0)
			(end 3.64 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 5.08 0)
			(end 6.18 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 7.62 0)
			(end 8.72 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 10.16 0)
			(end 11.26 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 12.7 0)
			(end 13.8 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 15.24 0)
			(end 16.34 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_circle
			(center 17.78 0)
			(end 18.88 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 8.89 2 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole roundrect
			(at 0 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
			(roundrect_rratio 0.113636)
					(net "SOIL_A0")
		)
		(pad "2" thru_hole circle
			(at 2.54 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "3" thru_hole circle
			(at 5.08 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A1")
		)
		(pad "4" thru_hole circle
			(at 7.62 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "5" thru_hole circle
			(at 10.16 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A2")
		)
		(pad "6" thru_hole circle
			(at 12.7 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "7" thru_hole circle
			(at 15.24 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "SOIL_A3")
		)
		(pad "8" thru_hole circle
			(at 17.78 0)
			(size 2.2 2.2)
			(drill 1.1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/TerminalBlock_Phoenix.3dshapes/TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	
		(fp_rect
			(start -2.0000 -12.6000)
			(end 19.7800 3.6000)
			(stroke
				(width 0.01)
				(type default)
			)
			(fill no)
			(layer "F.Fab")
			(uuid "20ee3897-6523-4357-a423-c5bd88f81531")
		)
)

  	(footprint "PinHeader_1x04_P2.54mm_Vertical"
			(at 31.3606 29.8706 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Through hole straight pin header, 1x04, 2.54mm pitch, single row")
		(tags "Through hole pin header THT 1x04 2.54mm single row")
		(property "Reference" "J9"
			(at 0 -2.38 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "SHT41_I2C"
			(at 0 10 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "connector/pin_header_socket"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr through_hole)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.38 -1.38)
			(end 0 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 0)
			(end -1.38 -1.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end -1.38 9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 1.27)
			(end 1.38 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.38 9)
			(end 1.38 9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.38 1.27)
			(end 1.38 9)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1.77 -1.77)
			(end 1.77 9.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 -0.635)
			(end -0.635 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.27 8.89)
			(end -1.27 -0.635)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.635 -1.27)
			(end 1.27 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 -1.27)
			(end 1.27 8.89)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.27 8.89)
			(end -1.27 8.89)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 3.81 90)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "+3V3")
		)
		(pad "2" thru_hole circle
			(at 0 2.54)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "GND")
		)
		(pad "3" thru_hole circle
			(at 0 5.08)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "I2C_SDA")
		)
		(pad "4" thru_hole circle
			(at 0 7.62)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask")
			(remove_unused_layers no)
					(net "I2C_SCL")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x04_P2.54mm_Vertical.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "SOT-23"
			(at 26.877 38.9421 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)")
		(tags "SOT TO_SOT_SMD")
		(property "Reference" "Q1"
			(at 0 -2.4 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AO3400A"
			(at 0 2.4 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "package/gullwing"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.76 -1.56)
			(end 0.76 -1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 -1.51)
			(end -0.76 -1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 0.39)
			(end -0.76 -0.39)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 1.56)
			(end -0.76 1.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 -1.56)
			(end 0.76 -0.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 0.56)
			(end 0.76 1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 1.56)
			(end -0.76 1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy -1.3 -0.38)
				(xy -1.06 -0.05)
				(xy -1.54 -0.05)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 -1.5)
			(end -0.9 -1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 -0.39)
			(end -1.93 -1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 0.39)
			(end -0.9 0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 1.5)
			(end -1.93 0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -1.7)
			(end 0.9 -1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -1.5)
			(end -0.9 -1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -0.39)
			(end -1.93 -0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 0.39)
			(end -0.9 -0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 1.5)
			(end -1.93 1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 1.7)
			(end -0.9 1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 -1.7)
			(end 0.9 -0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 -0.55)
			(end 1.93 -0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 0.55)
			(end 0.9 1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 1.7)
			(end -0.9 1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.93 -0.55)
			(end 1.93 0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.93 0.55)
			(end 0.9 0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy -0.325 -1.45)
				(xy 0.65 -1.45)
				(xy 0.65 1.45)
				(xy -0.65 1.45)
				(xy -0.65 -1.125)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(effects
				(font
					(size 0.72 0.72)
					(thickness 0.11)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.9375 -0.95)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/Q1_GATE")
		)
		(pad "2" smd roundrect
			(at -0.9375 0.95)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "GND")
		)
		(pad "3" smd roundrect
			(at 0.9375 0)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/FAN_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "SOT-23"
			(at 62.1414 27.932 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "SOT, 3 Pin (JEDEC TO-236 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=TO-236)")
		(tags "SOT TO_SOT_SMD")
		(property "Reference" "Q2"
			(at 0 -2.4 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "AO3400A"
			(at 0 2.4 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "package/gullwing"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.76 -1.56)
			(end 0.76 -1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 -1.51)
			(end -0.76 -1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 0.39)
			(end -0.76 -0.39)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.76 1.56)
			(end -0.76 1.51)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 -1.56)
			(end 0.76 -0.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 0.56)
			(end 0.76 1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.76 1.56)
			(end -0.76 1.56)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy -1.3 -0.38)
				(xy -1.06 -0.05)
				(xy -1.54 -0.05)
			)
			(stroke
				(width 0.12)
				(type solid)
			)
			(fill yes)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 -1.5)
			(end -0.9 -1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 -0.39)
			(end -1.93 -1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 0.39)
			(end -0.9 0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.93 1.5)
			(end -1.93 0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -1.7)
			(end 0.9 -1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -1.5)
			(end -0.9 -1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 -0.39)
			(end -1.93 -0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 0.39)
			(end -0.9 -0.39)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 1.5)
			(end -1.93 1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.9 1.7)
			(end -0.9 1.5)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 -1.7)
			(end 0.9 -0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 -0.55)
			(end 1.93 -0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 0.55)
			(end 0.9 1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 0.9 1.7)
			(end -0.9 1.7)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.93 -0.55)
			(end 1.93 0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1.93 0.55)
			(end 0.9 0.55)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_poly
			(pts
				(xy -0.325 -1.45)
				(xy 0.65 -1.45)
				(xy 0.65 1.45)
				(xy -0.65 1.45)
				(xy -0.65 -1.125)
			)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 90)
			(layer "F.Fab")
			(effects
				(font
					(size 0.72 0.72)
					(thickness 0.11)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.9375 -0.95)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/Q2_GATE")
		)
		(pad "2" smd roundrect
			(at -0.9375 0.95)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "GND")
		)
		(pad "3" smd roundrect
			(at 0.9375 0)
			(size 1.475 0.6)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/PUMP_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_SMD.3dshapes/SOT-23.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "D_SMA"
			(at 20.6459 29.2279 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "pcbnew")
		(generator_version "10.0")
		(layer "F.Cu")
		(descr "Diode SMA (DO-214AC)")
		(tags "Diode SMA (DO-214AC)")
		(property "Reference" "D1"
			(at 0 -2.5 0)
			(layer "F.Fab")
			(uuid "94d38b7b-eca2-5835-afee-201546642c74")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "1N4007"
			(at 0 2.6 0)
			(layer "F.Fab")
			(uuid "aa08665e-e318-5ab9-97eb-69e48d932360")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "326fa885-5357-5c02-a509-0b99552efef8")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "31ac272b-b1dd-5909-963e-4663bcb6cf9e")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -3.51 -1.65)
			(end -3.51 1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "cf374c41-e05a-5a3a-8992-beacdf34341f")
		)
		(fp_line
			(start -3.51 -1.65)
			(end 2 -1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "95f3ace0-5ead-5ce2-b7b8-c7024bb67654")
		)
		(fp_line
			(start -3.51 1.65)
			(end 2 1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "1fe78f05-5342-576d-82da-032ac9474ec8")
		)
		(fp_line
			(start -3.5 -1.75)
			(end 3.5 -1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "45ee73c4-eace-514f-b94d-77a8b0647dd1")
		)
		(fp_line
			(start -3.5 1.75)
			(end -3.5 -1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "94a41ab9-a4a6-5b62-a186-529d7c531f12")
		)
		(fp_line
			(start 3.5 -1.75)
			(end 3.5 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "1bd431be-d778-543b-a6e0-cc0db1e1e0b8")
		)
		(fp_line
			(start 3.5 1.75)
			(end -3.5 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "30247e2d-d2f0-5a70-9baf-1b4274518ef2")
		)
		(fp_line
			(start -2.3 1.5)
			(end -2.3 -1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "c5d06abb-6bb9-51ba-b840-ce2a2b45a2da")
		)
		(fp_line
			(start -0.64944 -0.79908)
			(end -0.64944 0.80112)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9795454c-4b5e-5639-8957-3564dcd97937")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end -1.55114 0.00102)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "a8608df4-11a6-5f36-bd89-b71822dfabd0")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end 0.50118 -0.79908)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "68fd1b39-5756-5210-968b-faf88359e2ab")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end 0.50118 0.75032)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "8e85a17c-87b7-5c61-94f3-3b61efa6fd48")
		)
		(fp_line
			(start 0.50118 0.00102)
			(end 1.4994 0.00102)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "abbb1fd6-98c1-5923-ab87-d377d906bf28")
		)
		(fp_line
			(start 0.50118 0.75032)
			(end 0.50118 -0.79908)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "fd5ff1d0-c553-570e-a281-20da4a542d69")
		)
		(fp_line
			(start 2.3 -1.5)
			(end -2.3 -1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "2c722def-2541-5239-93a1-6b09f46365fc")
		)
		(fp_line
			(start 2.3 -1.5)
			(end 2.3 1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "46bca512-9344-57b5-a54b-5878406b3ec3")
		)
		(fp_line
			(start 2.3 1.5)
			(end -2.3 1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "ae53cf01-fb83-50cb-b1af-170c47456d46")
		)
		(fp_text user "${REFERENCE}"
			(at 0 -2.5 0)
			(layer "F.Fab")
			(uuid "67072271-9697-5aaf-85a3-d88934a83ffc")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -2 0)
			(size 2.5 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.1388888889)
			(uuid "5cd966a8-8dad-5dbf-8eb0-532d2f90f662")
					(net "+12V")
		)
		(pad "2" smd roundrect
			(at 2 0)
			(size 2.5 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.1388888889)
			(uuid "c985d064-2594-5555-bf4f-a479f7a76a18")
					(net "/gh/FAN_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "D_SMA"
			(at 49.8319 63.9368 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "pcbnew")
		(generator_version "10.0")
		(layer "F.Cu")
		(descr "Diode SMA (DO-214AC)")
		(tags "Diode SMA (DO-214AC)")
		(property "Reference" "D2"
			(at 0 -2.5 0)
			(layer "F.Fab")
			(uuid "c31ba14d-cae8-583d-9a55-6df5abad8f92")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "1N4007"
			(at 0 2.6 0)
			(layer "F.Fab")
			(uuid "bea85bab-dcb3-51c1-a839-e9f0faf83905")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "76ce0aa7-cad2-545e-971a-b7f49ecebea7")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "3a1dd913-5b2d-5605-9a75-bc878b2fcb21")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -3.51 -1.65)
			(end -3.51 1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6a63df16-f70e-5d32-8a71-52c612aa04c3")
		)
		(fp_line
			(start -3.51 -1.65)
			(end 2 -1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "d9558209-72c0-5ecd-9d60-ec20c81dcdef")
		)
		(fp_line
			(start -3.51 1.65)
			(end 2 1.65)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "ea9cbb50-fbba-5781-9f5f-f54bbde47e64")
		)
		(fp_line
			(start -3.5 -1.75)
			(end 3.5 -1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6ee8668c-bbf1-58ca-a698-df8aec4b347e")
		)
		(fp_line
			(start -3.5 1.75)
			(end -3.5 -1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "d547d5d7-84ec-5e54-b52f-ff57ebfc0891")
		)
		(fp_line
			(start 3.5 -1.75)
			(end 3.5 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "b39a2fdf-c86b-5b47-8b1c-43b99922c5ba")
		)
		(fp_line
			(start 3.5 1.75)
			(end -3.5 1.75)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "8e8af051-e1e7-58a1-8334-82dc97019e7c")
		)
		(fp_line
			(start -2.3 1.5)
			(end -2.3 -1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "771ccce3-4ed9-5eef-9c88-d0d4ca2660e3")
		)
		(fp_line
			(start -0.64944 -0.79908)
			(end -0.64944 0.80112)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "94aedb7c-d797-5c9e-857b-7e9fda9c0490")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end -1.55114 0.00102)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "9b04dde3-6572-5594-aed2-fad71d67cbf0")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end 0.50118 -0.79908)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "021ade22-5b10-567d-a872-7a13df54e317")
		)
		(fp_line
			(start -0.64944 0.00102)
			(end 0.50118 0.75032)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "bfa793b4-5e38-5b28-963b-abd1df998234")
		)
		(fp_line
			(start 0.50118 0.00102)
			(end 1.4994 0.00102)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "e8bc47fe-6bf7-57d9-a607-d36bb7075936")
		)
		(fp_line
			(start 0.50118 0.75032)
			(end 0.50118 -0.79908)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "4c10f725-9117-5040-8db8-114971d3e297")
		)
		(fp_line
			(start 2.3 -1.5)
			(end -2.3 -1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "6c788fb3-da7e-5edb-820d-893150aebbfc")
		)
		(fp_line
			(start 2.3 -1.5)
			(end 2.3 1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f40273e9-7485-5486-90ea-f47895ec99cb")
		)
		(fp_line
			(start 2.3 1.5)
			(end -2.3 1.5)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "5877f59f-1d3c-5373-b073-86ee33758b9a")
		)
		(fp_text user "${REFERENCE}"
			(at 0 -2.5 0)
			(layer "F.Fab")
			(uuid "4bcf1664-837b-51a9-b950-296776c7bb8f")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" smd roundrect
			(at -2 0)
			(size 2.5 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.1388888889)
			(uuid "1c56a3ac-edbf-5ace-a8ff-d1ba53488c86")
					(net "+12V")
		)
		(pad "2" smd roundrect
			(at 2 0)
			(size 2.5 1.8)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.1388888889)
			(uuid "aaaa4c4e-9629-5a01-ae0b-fcbe383eec55")
					(net "/gh/PUMP_LOW")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SMA.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 26.5985 51.224 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R1"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "FAN_DRIVE")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/Q1_GATE")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 61.6692 38.6418 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R2"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "PUMP_DRIVE")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/Q2_GATE")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 46.4886 48.2695 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R3"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "330"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "SSR_HEATER")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/SSR_HEATER_OUT")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 38.2724 51.2246 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R4"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "330"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "SSR_LIGHT")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/SSR_LIGHT_OUT")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 26.7029 63.7717 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R5"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "4k7"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+3V3")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "I2C_SDA")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 38.3322 63.9023 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R6"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "4k7"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+3V3")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "I2C_SCL")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "LED_0805_2012Metric"
			(at 73.2332 51.196 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
		(tags "LED")
		(property "Reference" "D3"
			(at 0 -1.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "LED_GREEN"
			(at 0 1.65 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -1.685 -0.96)
			(end -1.685 0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1.685 0.96)
			(end 1 0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1 -0.96)
			(end -1.685 -0.96)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1.68 -0.95)
			(end 1.68 0.95)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 -0.3)
			(end -1 0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -1 0.6)
			(end 1 0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.7 -0.6)
			(end -1 -0.3)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1 -0.6)
			(end -0.7 -0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start 1 0.6)
			(end 1 -0.6)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.9375 0)
			(size 0.975 1.4)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/LED_K_TO_GPIO")
		)
		(pad "2" smd roundrect
			(at 0.9375 0)
			(size 0.975 1.4)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/LED_R_TO_LED_A")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/LED_SMD.3dshapes/LED_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "R_0402_1005Metric"
			(at 61.5375 51.0876 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "resistor")
		(property "Reference" "R7"
			(at 0 -1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "1k"
			(at 0 1.17 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.153641 -0.38)
			(end 0.153641 -0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.153641 0.38)
			(end 0.153641 0.38)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.93 -0.47)
			(end 0.93 0.47)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.525 -0.27)
			(end 0.525 0.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.26 0.26)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+3V3")
		)
		(pad "2" smd roundrect
			(at 0.51 0)
			(size 0.54 0.64)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "/gh/LED_R_TO_LED_A")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "C_0402_1005Metric"
			(at 61.6679 63.7935 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "capacitor")
		(property "Reference" "C1"
			(at 0 -1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+12V")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "C_0805_2012Metric"
			(at 73.124 26.0666 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing)")
		(tags "capacitor")
		(property "Reference" "C2"
			(at 0 -1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "10u"
			(at 0 1.68 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.261252 -0.735)
			(end 0.261252 -0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.261252 0.735)
			(end 0.261252 0.735)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1.7 -0.98)
			(end 1.7 0.98)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -1 -0.625)
			(end 1 0.625)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.5 0.5)
					(thickness 0.08)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+12V")
		)
		(pad "2" smd roundrect
			(at 0.95 0)
			(size 1 1.45)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "C_0402_1005Metric"
			(at 73.2618 38.6376 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")
		(tags "capacitor")
		(property "Reference" "C3"
			(at 0 -1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "100n"
			(at 0 1.16 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "SMD_2terminal_chip_molded"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr smd)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_line
			(start -0.107836 -0.36)
			(end 0.107836 -0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_line
			(start -0.107836 0.36)
			(end 0.107836 0.36)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.91 -0.46)
			(end 0.91 0.46)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_rect
			(start -0.5 -0.25)
			(end 0.5 0.25)
			(stroke
				(width 0.1)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 0.25 0.25)
					(thickness 0.04)
				)
			)
		)
		(pad "1" smd roundrect
			(at -0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "+3V3")
		)
		(pad "2" smd roundrect
			(at 0.48 0)
			(size 0.56 0.62)
			(layers "F.Cu" "F.Mask" "F.Paste")
			(roundrect_rratio 0.25)
					(net "GND")
		)
		(embedded_fonts no)
		(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0402_1005Metric.step"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)

  	(footprint "MountingHole:MountingHole_3.2mm_M3"
			(at 8.5 6 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole M3")
		(property "Reference" "MH1"
			(at 0 -4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole"
			(at 0 4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 3.2 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 3.45 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(MH1-Pad)")
		)
		(embedded_fonts no)
	)

  	(footprint "MountingHole:MountingHole_3.2mm_M3"
			(at 91.5 6 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole M3")
		(property "Reference" "MH2"
			(at 0 -4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole"
			(at 0 4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 3.2 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 3.45 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(MH2-Pad)")
		)
		(embedded_fonts no)
	)

  	(footprint "MountingHole:MountingHole_3.2mm_M3"
			(at 6 84 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole M3")
		(property "Reference" "MH3"
			(at 0 -4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole"
			(at 0 4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 3.2 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 3.45 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(MH3-Pad)")
		)
		(embedded_fonts no)
	)

  	(footprint "MountingHole:MountingHole_3.2mm_M3"
			(at 91.5 60 0)
			(layer "F.Cu")
		(version 20260206)
		(generator "kicad-footprint-generator")
		(layer "F.Cu")
		(descr "Mounting Hole 3.2mm, M3, no annular, generated by kicad-footprint-generator mountinghole.py")
		(tags "mountinghole M3")
		(property "Reference" "MH4"
			(at 0 -4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole"
			(at 0 4.15 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "KiLib_Generator" "mounting_hardware/mounting_hole"
			(at 0 0 0)
			(layer "F.Fab")
			(hide yes)
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(attr exclude_from_pos_files exclude_from_bom)
		(duplicate_pad_numbers_are_jumpers no)
		(fp_circle
			(center 0 0)
			(end 3.2 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
		)
		(fp_circle
			(center 0 0)
			(end 3.45 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.Fab")
		)
		(fp_text user "${REFERENCE}"
			(at 0 0 0)
			(layer "F.Fab")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask")
					(net "unconnected-(MH4-Pad)")
		)
		(embedded_fonts no)
	)

  (segment (start 2.2700 13.0300) (end 3.3950 11.9050) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 3.3950 11.9050) (end 96.6050 11.9050) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 96.6050 11.9050) (end 97.7300 13.0300) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 97.7300 13.0300) (end 95.7300 13.0300) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 95.7300 13.0300) (end 44.0325 13.0300) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 44.0325 13.0300) (end 31.3606 25.5550) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 31.3606 25.5550) (end 31.3606 28.5456) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 31.3606 28.5456) (end 31.3606 29.8706) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 31.3606 29.8706) (end 32.4856 29.8706) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 32.4856 29.8706) (end 33.3606 29.8706) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 33.3606 29.8706) (end 33.2640 56.7006) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 33.2640 56.7006) (end 29.7284 60.2362) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 29.7284 60.2362) (end 29.6977 63.7717) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 29.6977 63.7717) (end 26.1929 63.7717) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 26.1929 63.7717) (end 26.5465 63.4181) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 26.5465 63.4181) (end 30.0727 63.3967) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 30.0727 63.3967) (end 37.8222 63.4023) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 37.8222 63.4023) (end 37.8222 63.9023) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 37.8222 63.9023) (end 37.8222 63.4023) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 37.8222 63.4023) (end 50.3069 51.0876) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 50.3069 51.0876) (end 61.0275 51.0876) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 61.0275 51.0876) (end 61.0275 49.3903) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 61.0275 49.3903) (end 62.4661 47.9376) (width 0.2500) (layer "F.Cu") (net 1))
  (segment (start 62.4661 47.9376) (end 71.7818 38.6376) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 71.7818 38.6376) (end 72.7818 38.6376) (width 0.2500) (layer "B.Cu") (net 1))
  (segment (start 21.2700 85.9000) (end 21.2700 83.9000) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 21.2700 83.9000) (end 21.4700 83.7000) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 21.4700 83.7000) (end 21.6021 66.0170) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 21.6021 66.0170) (end 27.8145 59.8750) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 27.8145 59.8750) (end 27.8145 38.9421) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 27.8145 38.9421) (end 27.8145 36.9421) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 27.8145 36.9421) (end 22.6459 36.9050) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 22.6459 36.9050) (end 22.6459 32.2250) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 22.6459 32.2250) (end 22.0890 31.6600) (width 0.1000) (layer "F.Cu") (net 6))
  (segment (start 22.0890 31.6600) (end 22.6459 32.2250) (width 0.1000) (layer "B.Cu") (net 6))
  (segment (start 22.6459 32.2250) (end 22.6459 29.2279) (width 0.1000) (layer "B.Cu") (net 6))
  (segment (start 2.2700 48.5900) (end 4.1250 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 4.1250 48.5900) (end 7.2700 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 7.2700 48.5900) (end 7.8750 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 7.8750 48.5900) (end 10.1000 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 10.1000 48.5900) (end 10.3750 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 10.3750 48.5900) (end 10.6500 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 10.6500 48.5900) (end 10.7500 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 10.7500 48.5900) (end 11.9950 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 11.9950 48.5900) (end 12.2700 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 12.2700 48.5900) (end 12.5450 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 12.5450 48.5900) (end 17.1209 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 17.1209 48.5900) (end 18.3709 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 18.3709 48.5900) (end 19.8950 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 19.8950 48.5900) (end 20.4450 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 20.4450 48.5900) (end 20.9950 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 20.9950 48.5900) (end 21.4700 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 21.4700 48.5900) (end 22.0950 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 22.0950 48.5900) (end 27.6535 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 27.6535 48.5900) (end 28.8275 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 28.8275 48.5900) (end 29.6356 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 29.6356 48.5900) (end 37.2174 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 37.2174 48.5900) (end 66.8025 48.5900) (width 0.1000) (layer "B.Cu") (net 21))
  (segment (start 66.8025 48.5900) (end 69.4489 51.1960) (width 0.1000) (layer "F.Cu") (net 21))
  (segment (start 69.4489 51.1960) (end 71.2957 51.1960) (width 0.1000) (layer "F.Cu") (net 21))
  (segment (start 71.2957 51.1960) (end 72.2957 51.1960) (width 0.1000) (layer "F.Cu") (net 21))
  (segment (start 74.1707 51.1960) (end 73.4087 51.1960) (width 0.1000) (layer "F.Cu") (net 20))
  (segment (start 73.4087 51.1960) (end 73.0577 51.1960) (width 0.1000) (layer "F.Cu") (net 20))
  (segment (start 73.0577 51.1960) (end 73.0475 52.5876) (width 0.1000) (layer "F.Cu") (net 20))
  (segment (start 73.0475 52.5876) (end 72.5475 52.5876) (width 0.1000) (layer "F.Cu") (net 20))
  (segment (start 72.5475 52.5876) (end 71.3990 52.5876) (width 0.1000) (layer "F.Cu") (net 20))
  (segment (start 71.3990 52.5876) (end 69.4489 52.5876) (width 0.1000) (layer "B.Cu") (net 20))
  (segment (start 69.4489 52.5876) (end 68.1245 52.5876) (width 0.1000) (layer "B.Cu") (net 20))
  (segment (start 68.1245 52.5876) (end 66.6025 51.0876) (width 0.1000) (layer "B.Cu") (net 20))
  (segment (start 66.6025 51.0876) (end 66.2525 51.0876) (width 0.1000) (layer "B.Cu") (net 20))
  (segment (start 66.2525 51.0876) (end 62.0475 51.0876) (width 0.1000) (layer "B.Cu") (net 20))
  (segment (start 51.2700 85.9000) (end 51.2700 83.9000) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 51.2700 83.9000) (end 51.2700 82.1250) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 51.2700 82.1250) (end 51.2700 67.4950) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 51.2700 67.4950) (end 51.2700 65.9000) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 51.2700 65.9000) (end 52.5390 64.6439) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 52.5390 64.6439) (end 51.8319 63.9368) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 51.8319 63.9368) (end 52.1855 63.5832) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 52.1855 63.5832) (end 52.1297 55.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 52.1297 55.2298) (end 52.1297 54.7950) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 52.1297 54.7950) (end 52.1297 54.7298) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 52.1297 54.7298) (end 52.1297 54.5387) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 52.1297 54.5387) (end 52.1297 53.2298) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 52.1297 53.2298) (end 53.9978 51.3626) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 53.9978 51.3626) (end 55.5942 49.7653) (width 0.1000) (layer "B.Cu") (net 9))
  (segment (start 55.5942 49.7653) (end 59.1297 46.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 59.1297 46.2298) (end 62.6652 42.6943) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 62.6652 42.6943) (end 63.1297 42.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.1297 42.2298) (end 63.1297 38.4126) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.1297 38.4126) (end 63.1297 37.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.1297 37.2298) (end 63.2797 37.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.2797 37.2298) (end 63.3554 37.2298) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.3554 37.2298) (end 63.4325 28.2856) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 63.4325 28.2856) (end 63.0789 27.9320) (width 0.1000) (layer "F.Cu") (net 9))
  (segment (start 25.9395 37.9921) (end 25.1466 38.7850) (width 0.1000) (layer "F.Cu") (net 5))
  (segment (start 25.1466 38.7850) (end 24.4395 39.4921) (width 0.1000) (layer "F.Cu") (net 5))
  (segment (start 24.4395 39.4921) (end 24.4395 47.8626) (width 0.1000) (layer "B.Cu") (net 5))
  (segment (start 24.4395 47.8626) (end 24.4395 48.0682) (width 0.1000) (layer "F.Cu") (net 5))
  (segment (start 24.4395 48.0682) (end 27.1085 50.7240) (width 0.1000) (layer "F.Cu") (net 5))
  (segment (start 27.1085 50.7240) (end 27.1085 51.2240) (width 0.1000) (layer "F.Cu") (net 5))
  (segment (start 61.2039 26.9820) (end 60.8503 27.3356) (width 0.1000) (layer "F.Cu") (net 8))
  (segment (start 60.8503 27.3356) (end 60.7650 37.2276) (width 0.1000) (layer "B.Cu") (net 8))
  (segment (start 60.7650 37.2276) (end 62.1792 38.6418) (width 0.1000) (layer "B.Cu") (net 8))
  (segment (start 50.3578 39.1471) (end 48.9436 40.5613) (width 0.1000) (layer "F.Cu") (net 11))
  (segment (start 48.9436 40.5613) (end 46.9986 42.5387) (width 0.1000) (layer "F.Cu") (net 11))
  (segment (start 46.9986 42.5387) (end 46.9986 48.2695) (width 0.1000) (layer "F.Cu") (net 11))
  (segment (start 40.3275 32.2092) (end 41.7025 33.5842) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 41.7025 33.5842) (end 42.0425 33.9242) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 42.0425 33.9242) (end 42.0425 35.5742) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 42.0425 35.5742) (end 40.3275 37.3050) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 37.3050) (end 40.3275 37.4171) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 37.4171) (end 40.3275 38.2668) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 38.2668) (end 40.3275 44.9250) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 44.9250) (end 40.3275 46.4298) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 46.4298) (end 40.3275 46.7000) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 46.7000) (end 40.3275 46.9000) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 46.9000) (end 40.3275 47.4500) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 47.4500) (end 40.3275 47.4650) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 47.4650) (end 40.3275 47.4876) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 47.4876) (end 40.3275 48.4126) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 40.3275 48.4126) (end 38.7824 49.9653) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 38.7824 49.9653) (end 38.7824 50.0050) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 38.7824 50.0050) (end 38.7824 50.1403) (width 0.1000) (layer "F.Cu") (net 13))
  (segment (start 38.7824 50.1403) (end 38.7824 50.4926) (width 0.1000) (layer "B.Cu") (net 13))
  (segment (start 38.7824 50.4926) (end 38.7824 50.6290) (width 0.1000) (layer "B.Cu") (net 13))
  (segment (start 38.7824 50.6290) (end 38.7824 50.6296) (width 0.1000) (layer "B.Cu") (net 13))
  (segment (start 38.7824 50.6296) (end 38.7824 51.2246) (width 0.1000) (layer "B.Cu") (net 13))
  (segment (start 2.2700 23.1900) (end 3.3950 24.3150) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 3.3950 24.3150) (end 3.3950 24.6050) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 3.3950 24.6050) (end 3.3950 34.4750) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 3.3950 34.4750) (end 20.4192 51.2240) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 20.4192 51.2240) (end 22.2950 51.2240) (width 0.1000) (layer "B.Cu") (net 4))
  (segment (start 22.2950 51.2240) (end 22.7642 51.2240) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 22.7642 51.2240) (end 25.3466 51.2240) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 25.3466 51.2240) (end 26.0885 51.2240) (width 0.1000) (layer "F.Cu") (net 4))
  (segment (start 2.2700 46.0500) (end 1.1450 44.9250) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 1.1450 44.9250) (end 1.1450 37.3050) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 1.1450 37.3050) (end 2.2700 37.3050) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 2.2700 37.3050) (end 29.8977 37.4906) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 29.8977 37.4906) (end 31.3606 37.4906) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 31.3606 37.4906) (end 31.3606 38.5671) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 38.5671) (end 31.3606 47.2500) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.2500) (end 31.3606 47.2650) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.2650) (end 31.3606 47.2876) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.2876) (end 31.3606 47.4500) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.4500) (end 31.3606 47.4650) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.4650) (end 31.3606 47.4876) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.4876) (end 31.3606 47.6500) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.6500) (end 31.3606 47.6650) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 47.6650) (end 31.3606 48.2126) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 48.2126) (end 31.3606 57.0600) (width 0.1000) (layer "F.Cu") (net 19))
  (segment (start 31.3606 57.0600) (end 38.3192 63.9023) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 38.3192 63.9023) (end 38.8422 63.9023) (width 0.1000) (layer "B.Cu") (net 19))
  (segment (start 2.2700 43.5100) (end 4.2700 43.5100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 4.2700 43.5100) (end 20.6192 43.5100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 20.6192 43.5100) (end 20.6450 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 20.6450 48.3900) (end 22.2950 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 22.2950 48.3900) (end 27.8535 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.8535 48.3900) (end 28.6275 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 28.6275 48.3900) (end 29.0275 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 29.0275 48.3900) (end 29.4356 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 29.4356 48.3900) (end 29.8356 48.3900) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 29.8356 48.3900) (end 31.1606 47.0500) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 31.1606 47.0500) (end 31.1606 43.5100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 31.1606 43.5100) (end 31.7356 43.5100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 31.7356 43.5100) (end 32.4856 43.5100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 32.4856 43.5100) (end 32.4856 38.6156) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 32.4856 38.6156) (end 32.4856 36.0756) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 32.4856 36.0756) (end 31.3606 34.9506) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 31.3606 34.9506) (end 32.4856 36.0756) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 32.4856 36.0756) (end 32.6165 53.0152) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 32.6165 53.0152) (end 27.2129 53.0298) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 53.0298) (end 27.2129 53.4298) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 53.4298) (end 27.2129 53.7717) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 53.7717) (end 27.2129 54.3387) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 54.3387) (end 27.2129 54.7387) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 54.7387) (end 27.2129 55.0298) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 55.0298) (end 27.2129 55.4298) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 55.4298) (end 27.2129 56.6850) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 56.6850) (end 27.2129 57.6100) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 57.6100) (end 27.2129 62.7050) (width 0.1000) (layer "B.Cu") (net 18))
  (segment (start 27.2129 62.7050) (end 27.2129 63.2717) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 27.2129 63.2717) (end 27.2129 63.7717) (width 0.1000) (layer "F.Cu") (net 18))
  (segment (start 2.2700 33.3500) (end 3.5950 33.3500) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 3.5950 33.3500) (end 3.6950 33.3500) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 3.6950 33.3500) (end 4.0700 33.3500) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 4.0700 33.3500) (end 10.9500 33.3500) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 10.9500 33.3500) (end 32.4856 33.5356) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 32.4856 33.5356) (end 32.4856 33.3500) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 32.4856 33.3500) (end 35.5723 30.3120) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 35.5723 30.3120) (end 40.9497 24.8774) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 40.9497 24.8774) (end 40.9497 20.9717) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 40.9497 20.9717) (end 40.9497 18.9717) (width 0.1000) (layer "B.Cu") (net 14))
  (segment (start 2.2700 38.4300) (end 4.2700 38.4300) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 4.2700 38.4300) (end 20.7950 38.4300) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 20.7950 38.4300) (end 22.6317 38.4300) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 22.6317 38.4300) (end 22.6317 39.0168) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 22.6317 39.0168) (end 23.3817 39.0168) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 23.3817 39.0168) (end 41.2566 38.9156) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 41.2566 38.9156) (end 44.5825 35.5742) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 44.5825 35.5742) (end 51.1097 35.5387) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 35.5387) (end 51.1097 35.5150) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 35.5150) (end 51.1097 34.7506) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 34.7506) (end 51.1097 34.0750) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 34.0750) (end 51.1097 33.9242) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 33.9242) (end 51.1097 33.8256) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 33.8256) (end 51.1097 33.7842) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 33.7842) (end 51.1097 32.2250) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 32.2250) (end 51.1097 31.2856) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 31.2856) (end 51.1097 30.9956) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 30.9956) (end 51.1097 29.5956) (width 0.1000) (layer "F.Cu") (net 16))
  (segment (start 51.1097 29.5956) (end 51.1097 20.3467) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 51.1097 20.3467) (end 51.1097 18.9717) (width 0.1000) (layer "B.Cu") (net 16))
  (segment (start 2.2700 40.9700) (end 0.8558 39.5558) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 0.8558 39.5558) (end 0.9450 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 0.9450 18.9717) (end 1.1450 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 1.1450 18.9717) (end 1.1450 19.2350) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 1.1450 19.2350) (end 2.2700 19.2350) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 2.2700 19.2350) (end 3.3950 19.2350) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.3950 19.2350) (end 3.3950 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.3950 18.9717) (end 3.4950 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.4950 18.9717) (end 3.5950 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.5950 18.9717) (end 3.6950 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.6950 18.9717) (end 3.7950 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 3.7950 18.9717) (end 4.4450 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 4.4450 18.9717) (end 10.0000 13.4050) (width 0.1000) (layer "B.Cu") (net 17))
  (segment (start 10.0000 13.4050) (end 10.0000 12.6550) (width 0.1000) (layer "B.Cu") (net 17))
  (segment (start 10.0000 12.6550) (end 10.7500 12.6550) (width 0.1000) (layer "B.Cu") (net 17))
  (segment (start 10.7500 12.6550) (end 29.6356 12.7550) (width 0.1000) (layer "B.Cu") (net 17))
  (segment (start 29.6356 12.7550) (end 35.7723 18.9717) (width 0.1000) (layer "B.Cu") (net 17))
  (segment (start 35.7723 18.9717) (end 37.4174 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 37.4174 18.9717) (end 37.5472 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 37.5472 18.9717) (end 38.3672 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 38.3672 18.9717) (end 38.4672 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 38.4672 18.9717) (end 38.9525 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 38.9525 18.9717) (end 39.5747 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 39.5747 18.9717) (end 39.5747 20.3467) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 39.5747 20.3467) (end 44.6547 20.3467) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 44.6547 20.3467) (end 44.8647 20.3467) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 44.8647 20.3467) (end 52.2747 20.3467) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 52.2747 20.3467) (end 54.8147 20.3467) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 54.8147 20.3467) (end 56.1897 18.9717) (width 0.1000) (layer "F.Cu") (net 17))
  (segment (start 2.2700 28.2700) (end 1.1450 29.3950) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 1.1450 29.3950) (end 0.8558 29.6842) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 0.8558 29.6842) (end 0.9450 48.2695) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 0.9450 48.2695) (end 1.1450 48.2695) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 1.1450 48.2695) (end 1.1450 49.7150) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 1.1450 49.7150) (end 2.2700 49.7150) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 2.2700 49.7150) (end 45.9786 49.3903) (width 0.1000) (layer "B.Cu") (net 10))
  (segment (start 45.9786 49.3903) (end 45.9786 48.7695) (width 0.1000) (layer "F.Cu") (net 10))
  (segment (start 45.9786 48.7695) (end 45.9786 48.2695) (width 0.1000) (layer "F.Cu") (net 10))
  (segment (start 2.2700 30.8100) (end 3.7950 30.8100) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 3.7950 30.8100) (end 4.3250 30.8100) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 4.3250 30.8100) (end 4.4450 30.8100) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 4.4450 30.8100) (end 4.4450 25.3550) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 4.4450 25.3550) (end 3.5950 24.5150) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 3.5950 24.5150) (end 3.5950 18.7717) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 3.5950 18.7717) (end 3.3950 18.7717) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 3.3950 18.7717) (end 3.3950 19.5250) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 3.3950 19.5250) (end 1.1450 19.5250) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 1.1450 19.5250) (end 1.1450 18.7717) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 1.1450 18.7717) (end 0.7450 18.7717) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 0.7450 18.7717) (end 0.6750 30.8100) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 0.6750 30.8100) (end 0.6750 51.2246) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 0.6750 51.2246) (end 1.1450 51.2246) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 1.1450 51.2246) (end 1.1450 52.2550) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 1.1450 52.2550) (end 2.2700 52.2550) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 2.2700 52.2550) (end 37.7624 52.0940) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 37.7624 52.0940) (end 37.7624 51.2246) (width 0.1000) (layer "B.Cu") (net 12))
  (segment (start 25.8495 39.8021) (end 26.0295 39.9821) (width 0.6000) (layer "F.Cu") (net 2))
  (segment (start 61.1139 28.7920) (end 61.2939 28.9720) (width 0.6000) (layer "F.Cu") (net 2))
  (segment (start 62.1479 63.7935) (end 62.4479 63.7935) (width 0.6000) (layer "F.Cu") (net 2))
  (segment (start 73.9840 25.9766) (end 74.1640 26.1566) (width 0.6000) (layer "F.Cu") (net 2))
  (segment (start 73.7418 38.6376) (end 74.0418 38.6376) (width 0.6000) (layer "F.Cu") (net 2))
  (segment (start 2.2700 35.8900) (end 2.4900 35.8900) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 2.4900 35.8900) (end 2.7200 35.8900) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 2.7200 35.8900) (end 3.1700 35.8900) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 3.1700 35.8900) (end 24.9895 35.8900) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 24.9895 35.8900) (end 25.2995 35.8900) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 25.2995 35.8900) (end 30.2606 30.9706) (width 0.1000) (layer "F.Cu") (net 15))
  (segment (start 30.2606 30.9706) (end 30.2606 28.7706) (width 0.1000) (layer "F.Cu") (net 15))
  (segment (start 30.2606 28.7706) (end 42.8097 28.7041) (width 0.1000) (layer "F.Cu") (net 15))
  (segment (start 42.8097 28.7041) (end 46.0297 25.5166) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 46.0297 25.5166) (end 46.0297 18.9717) (width 0.1000) (layer "B.Cu") (net 15))
  (segment (start 2.2700 25.7300) (end 2.2700 25.1916) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 2.2700 25.1916) (end 1.2700 24.1900) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 1.2700 24.1900) (end 1.2700 22.1900) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 1.2700 22.1900) (end 3.2700 22.1900) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 3.2700 22.1900) (end 6.7500 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 6.7500 25.7300) (end 7.6750 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 7.6750 25.7300) (end 7.7500 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 7.7500 25.7300) (end 8.0750 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 8.0750 25.7300) (end 9.8000 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 9.8000 25.7300) (end 9.9000 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 9.9000 25.7300) (end 10.1750 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 10.1750 25.7300) (end 10.4500 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 10.4500 25.7300) (end 10.5750 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 10.5750 25.7300) (end 10.8500 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 10.8500 25.7300) (end 11.7950 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 11.7950 25.7300) (end 12.0700 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 12.0700 25.7300) (end 12.3450 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 12.3450 25.7300) (end 12.4700 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 12.4700 25.7300) (end 23.0209 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 23.0209 25.7300) (end 24.6395 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 24.6395 25.7300) (end 24.7895 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 24.7895 25.7300) (end 24.9466 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 24.9466 25.7300) (end 25.1895 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.1895 25.7300) (end 25.3466 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.3466 25.7300) (end 25.3995 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.3995 25.7300) (end 25.4995 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.4995 25.7300) (end 25.6685 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.6685 25.7300) (end 25.8179 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.8179 25.7300) (end 25.9179 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 25.9179 25.7300) (end 26.3895 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 26.3895 25.7300) (end 26.5085 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 26.5085 25.7300) (end 26.6885 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 26.6885 25.7300) (end 26.9085 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 26.9085 25.7300) (end 27.0129 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 27.0129 25.7300) (end 27.3085 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 27.3085 25.7300) (end 27.6145 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 27.6145 25.7300) (end 27.6329 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 27.6329 25.7300) (end 28.0535 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 28.0535 25.7300) (end 28.6275 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 28.6275 25.7300) (end 29.6977 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 29.6977 25.7300) (end 29.7977 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 29.7977 25.7300) (end 30.0977 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 30.0977 25.7300) (end 30.3477 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 30.3477 25.7300) (end 30.4477 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 30.4477 25.7300) (end 30.9106 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 30.9106 25.7300) (end 30.9606 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 30.9606 25.7300) (end 47.4800 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 47.4800 25.7300) (end 48.0300 25.7300) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 48.0300 25.7300) (end 61.1592 38.6418) (width 0.1000) (layer "F.Cu") (net 7))
  (segment (start 61.1879 63.7935) (end 61.1879 65.2950) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 61.1879 65.2950) (end 49.2461 65.3510) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 49.2461 65.3510) (end 47.8319 63.9368) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 48.7300 85.9000) (end 48.6686 85.9000) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 48.6686 85.9000) (end 48.5390 64.6439) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 48.5390 64.6439) (end 47.8319 63.9368) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 21.2700 4.1000) (end 21.2700 24.9166) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 21.2700 24.9166) (end 21.2700 26.5916) (width 0.1000) (layer "B.Cu") (net 3))
  (segment (start 21.2700 26.5916) (end 18.6459 29.2279) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 18.7300 85.9000) (end 20.1442 87.3142) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 20.1442 87.3142) (end 47.3158 87.3142) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 47.3158 87.3142) (end 48.7300 85.9000) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 61.1879 63.7935) (end 61.1879 52.9548) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 61.1879 52.9548) (end 72.1740 41.9548) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 72.1740 41.9548) (end 72.1740 26.0666) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 18.6459 29.2279) (end 20.9200 29.2279) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 20.9200 29.2279) (end 21.1437 56.3826) (width 0.1000) (layer "F.Cu") (net 3))
  (segment (start 21.1437 56.3826) (end 21.1950 65.7420) (width 0.1000) (layer "B.Cu") (net 3))
  (segment (start 21.1950 65.7420) (end 47.8319 65.6250) (width 0.1000) (layer "B.Cu") (net 3))
  (segment (start 47.8319 65.6250) (end 47.8319 63.9368) (width 0.1000) (layer "B.Cu") (net 3))
  (via (at 66.8025 48.5900) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 21))
  (via (at 71.3990 52.5876) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 20))
  (via (at 62.0475 51.0876) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 20))
  (via (at 51.2700 67.4950) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 9))
  (via (at 51.8319 63.9368) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 9))
  (via (at 52.1297 54.7950) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 9))
  (via (at 55.5942 49.7653) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 9))
  (via (at 24.4395 39.4921) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 5))
  (via (at 24.4395 47.8626) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 5))
  (via (at 60.8503 27.3356) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 8))
  (via (at 62.1792 38.6418) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 8))
  (via (at 38.7824 50.1403) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 13))
  (via (at 38.7824 51.2246) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 13))
  (via (at 20.4192 51.2240) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 4))
  (via (at 22.2950 51.2240) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 4))
  (via (at 31.3606 57.0600) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 19))
  (via (at 38.8422 63.9023) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 19))
  (via (at 32.4856 43.5100) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 18))
  (via (at 32.6165 53.0152) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 18))
  (via (at 27.2129 62.7050) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 18))
  (via (at 41.2566 38.9156) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 16))
  (via (at 51.1097 29.5956) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 16))
  (via (at 4.4450 18.9717) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 17))
  (via (at 35.7723 18.9717) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 17))
  (via (at 45.9786 49.3903) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 10))
  (via (at 37.7624 51.2246) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 12))
  (via (at 22.0890 31.6600) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 6))
  (via (at 22.6459 29.2279) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 6))
  (via (at 29.6977 63.7717) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 1))
  (via (at 26.1929 63.7717) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 1))
  (via (at 30.0727 63.3967) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 1))
  (via (at 62.4661 47.9376) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 1))
  (via (at 72.7818 38.6376) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 1))
  (via (at 25.2995 35.8900) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 15))
  (via (at 42.8097 28.7041) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 15))
  (via (at 22.6459 32.2250) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 6))
  (via (at 21.2700 24.9166) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 3))
  (via (at 21.2700 26.5916) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 3))
  (via (at 21.1437 56.3826) (size 0.6000) (drill 0.3000) (layers "F.Cu" "B.Cu") (net 3))
  (via (at 47.8319 63.9368) (size 0.4500) (drill 0.2000) (layers "F.Cu" "B.Cu") (net 3))

  (zone (net 2) (net_name "GND") (layer "F.Cu") (hatch edge 0.5)
    (priority 0)
    (connect_pads yes (clearance 0.15))
    (min_thickness 0.1)
    (fill yes (thermal_gap 0) (thermal_bridge_width 0))
    (polygon (pts
      (xy 0.3 0.3) (xy 99.7 0.3)
      (xy 99.7 89.7) (xy 0.3 89.7)
    ))
  )
  (zone (net 2) (net_name "GND") (layer "B.Cu") (hatch edge 0.5)
    (priority 0)
    (connect_pads yes (clearance 0.15))
    (min_thickness 0.1)
    (fill yes (thermal_gap 0) (thermal_bridge_width 0))
    (polygon (pts
      (xy 0.3 0.3) (xy 99.7 0.3)
      (xy 99.7 89.7) (xy 0.3 89.7)
    ))
  )

	(gr_line
		(start 59.5000 71.5000)
		(end 98.5000 71.5000)
		(stroke (width 0.2) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-1c5818e2")
	)
	(gr_line
		(start 59.5000 88.5000)
		(end 98.5000 88.5000)
		(stroke (width 0.2) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-3a96a1f0")
	)
	(gr_line
		(start 59.5000 71.5000)
		(end 59.5000 88.5000)
		(stroke (width 0.2) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-b999451f")
	)
	(gr_line
		(start 98.5000 71.5000)
		(end 98.5000 88.5000)
		(stroke (width 0.2) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-792bbc1a")
	)
	(gr_line
		(start 59.5000 78.3000)
		(end 98.5000 78.3000)
		(stroke (width 0.15) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-04375b91")
	)
	(gr_line
		(start 59.5000 83.7400)
		(end 98.5000 83.7400)
		(stroke (width 0.15) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-d2992e15")
	)
	(gr_line
		(start 77.0500 83.7400)
		(end 77.0500 88.5000)
		(stroke (width 0.15) (type default))
		(layer "F.SilkS")
		(uuid "cartouche-17399af2")
	)
	(gr_text "greenhouse-ctl"
		(at 79.0000 74.9000 0)
		(layer "F.SilkS")
		(uuid "cartouche-0793aa0b")
		(effects
			(font (face "JetBrains Mono") (size 3.0 3.0) (thickness 0.45)
				(bold yes))
		)
	)
	(gr_text "OPEN HARDWARE"
		(at 60.5000 81.0200 0)
		(layer "F.SilkS")
		(uuid "cartouche-ef10539f")
		(effects
			(font (face "JetBrains Mono") (size 0.8 0.8) (thickness 0.15))
			(justify left)
		)
	)
	(gr_text "kvm.dba.wtf"
		(at 97.5000 81.0200 0)
		(layer "F.SilkS")
		(uuid "cartouche-291dd8fc")
		(effects
			(font (face "JetBrains Mono") (size 0.8 0.8) (thickness 0.15))
			(justify right)
		)
	)
	(gr_text "REV"
		(at 68.2750 85.1680 0)
		(layer "F.SilkS")
		(uuid "cartouche-ec572956")
		(effects
			(font (face "JetBrains Mono") (size 0.8 0.8) (thickness 0.15))
		)
	)
	(gr_text "0.1"
		(at 68.2750 87.1672 0)
		(layer "F.SilkS")
		(uuid "cartouche-9be8f2f0")
		(effects
			(font (face "JetBrains Mono") (size 1.0 1.0) (thickness 0.15)
				(bold yes))
		)
	)
	(gr_text "DATE"
		(at 87.7750 85.1680 0)
		(layer "F.SilkS")
		(uuid "cartouche-6df9abe0")
		(effects
			(font (face "JetBrains Mono") (size 0.8 0.8) (thickness 0.15))
		)
	)
	(gr_text "2026-04"
		(at 87.7750 87.1672 0)
		(layer "F.SilkS")
		(uuid "cartouche-04d952b9")
		(effects
			(font (face "JetBrains Mono") (size 1.0 1.0) (thickness 0.15)
				(bold yes))
		)
	)
)